Software for laser shops, built by a laser shop
I'm Mike, the maker behind Laser Creations Shop in Gilbert, Arizona. I build these Windows apps for the work that comes through my own shop, then share them with other makers. Each one does one job well: it lays out the piece, checks it before you cut, and hands LightBurn a file that cuts true.
Mandala Layers · Plaque Designer · Hood Prop Designer
Find your next design tool
- Mandala Layers: Turn a prompt, a photo or a real lake into layered, laser-ready SVG files. Windows app: $199 once, with a 3-day trial. Web plans from $0 a month.
- Plaque Designer: Military plaques laid out in minutes, with proofs and LightBurn-ready files. $149 once, with a 7-day trial.
- Hood Prop Designer: Custom Camaro hood props whose cut line grows around your designs by itself. $149 as a one-time purchase, with a 7-day trial.
Mandala Layers
Layered art for your laser, from a prompt, a photo or a real lake
Describe it, upload it or pick a lake. Mandala Layers builds the stack of SVG sheets and checks every one before you cut.

Mandala Layers grew out of the layered pieces I cut at Laser Creations Shop. Describe the artwork and generate it with AI, upload your own picture, or start from one of more than 600 templates. The studio splits it into stacked sheets for your laser, shows the finished piece in 3D, and checks every layer for material too thin to cut, loose pieces and sheets that don't line up. The files are ordinary SVGs at real-world size, ready for LightBurn and other laser software.
Five studios in one app
- Stepped Layers: One design cut at several depths. Each sheet cuts away a little more, so the finished piece steps down.
- Landscape Silhouette Layers: One scene in depth, nearest in front and farthest at the back, a sheet for each depth.
- Vectorize a Photo: Turn a photo into an engraving, drawn by AI as pen and ink or line art, or as a dither of black-and-white dots with no AI at all.
- 3D Project Builder: Houses, boxes, lanterns, trays and more, cut as flat parts with tabs and slots that push together.
- Lake Map Layers: Build a stack from a real lake using public map data. The land carries roads and towns, and the water gets a sheet for every depth. In town, add a raised lattice of streets, in up to three sizes for your laser bed.
Check the design before you cut
- Checks every stack for thin material, loose pieces and misaligned sheets before you waste a board.
- 3D preview of the finished piece.
- SVG files at real-world size for LightBurn.
- AI pictures are optional: use credits, your own OpenAI key, or skip AI and upload your own art.
- The Windows app works offline except for AI pictures and fetching a lake's map. Your projects stay on your PC.
Pricing and free trial
Windows app: $199, paid once. Every version 1 update is included, with nothing to renew. One key covers up to 3 PCs. Try it free for 3 days with no sign-up, key or card. Available from the Microsoft Store.
On the web: Pay as you go at $0 a month, or Studio at $14.99 a month with every build included. AI picture credit packs start at $15 for 1,500 credits, and credits never expire.
Explore Mandala Layers and get started →
Plaque Designer
Military plaques, laid out in minutes
Lay out USA and flag military plaques, send the customer a proof, and export an SVG that LightBurn opens ready to cut.

I've made more than 700 USA-shaped military plaques at Laser Creations Shop, and each layout used to take me an hour and a half or more in Photoshop. Plaque Designer is the tool I built to stop doing that. Pick the shape and size, drop in branch emblems, unit patches and the service member's name, and the app adds the wood borders, recuts the resin pockets, and checks the plaque before you cut.
From layout to customer proof to laser
- Plaque shapes: USA, Straight Flag or Tattered Flag, at 24 or 36 inches wide or any custom width in inches or millimeters.
- Searchable logo library: Sorted by branch, including Army, Marine Corps, Navy, Air Force, Space Force, Coast Guard and National Guard, and by kind: emblems, unit patches, rank, MOS insignia, medals and vehicles. A shared library adds new logos automatically.
- Your own artwork: Import SVG, PNG or JPG, make JPG backgrounds transparent, and recolor SVG logos with the paint bucket.
- Names in 56 fonts: Set letter height by the capitals, or add your own TrueType and OpenType fonts.
- Wood and resin done for you: Every logo gets a solid wood border, 3/16 inch by default, and the resin cutouts are recut around it.
- Customer proofs: Preview stained or raw red oak with white, silver, black, red or blue resin. Save a 3000-pixel proof with the name, order number and size.
- Pieces sheet: Lay out each logo with its cut line and engraving so you can cut it from spare stock.
- Checks before you cut: Flags wood bridges thinner than 3 mm, loose wood and parts past the plaque edge. Click a warning to jump to it.
- Files that cut true: Every cut, engrave, image, backer and score line lands on its own LightBurn layer. A 24-inch plaque imports at 24.000 inches.
- Offline use: Works offline after a one-time activation.
$149 one-time purchase. Free 7-day trial.
No subscription and no account. All future updates are included, and one key covers up to 3 PCs. Try it free for 7 days with no key, account or card.
Visit Plaque Designer for the free trial or a licence key →
Hood Prop Designer
Custom hood props, laid out in minutes
Put your customer's designs and name on a 6th Gen Camaro hood prop. Where a design hangs off the edge, the cut line grows around it by itself.

Custom acrylic hood props look best when the logos break past the edge, and that's exactly what makes them slow to draw by hand. Hood Prop Designer handles the outline for you. Drag a design past the edge and the prop's cut line wraps around it with a clean 6 mm margin and rounded corners, live as you drag. It's built on the same editor as Plaque Designer, so the proofs, the design library and the LightBurn export work the same way.
Built around the way you make hood props
- The real prop, at real size: A 6th Gen Camaro hood prop at 4.006 × 29.946 inches, with the J-shaped hook notch that fits over the hood striker and the square mounting hole near the bottom.
- Any length you need: Type a length from 15.862 to 60 inches. Only the straight middle stretches, so the hook notch, tapers and mounting hole keep their exact size.
- The cut line draws itself: Designs that reach the edge get a 6 mm margin, and the prop stays one solid piece with one outer cut line.
- Patch tool: Draw a patch over a narrow gap that could snap in the acrylic, and the cut line runs straight across. The patch moves with its design.
- Checks before you cut: A design that isn't joined to the prop, a covered mounting hole, or a design blocking the hook notch is marked red.
- Proofs in your acrylic colors: Pick the prop color, recolor designs with the paint bucket, and fill outline letters for the proof. Save a 3000-pixel proof with the name, order number and size, ready to text or email.
- Everything is cut, nothing is engraved: The prop outline and mounting hole land on one LightBurn layer, and every design line and letter on another, all in real millimeters.
- Shared design library: GM, MOPAR and Ford designs reach every copy of the app automatically. Request missing designs from inside the app.
- Your own designs: Keep SVG files in a library folder, or in Google Drive, OneDrive or Dropbox so every PC sees the same set.
- Personalized names: Choose from 56 fonts, plus any TrueType or OpenType font you add.
$149 one-time purchase. Free 7-day trial.
All future updates are included, and one key covers up to 3 PCs. Try every feature free for 7 days with just your email: no key and no card.
Camaro is a trademark of General Motors. Hood Prop Designer is made by Laser Creations Shop and is not affiliated with or endorsed by General Motors or any other car maker.
